My Autopano Pro forum
Sharing knowledge around Autopano
You are not logged in.
Announcement
#1 2009-06-19 18:36:16
- Ludek007
- Member
- Registered: 2009-06-03
- Posts: 14
not shooting
please me help...
Shooting 5 photo panorama horizontal
1photo OK
2photo OK
3photo not shoot, papywizard OK > next photo
4photo OK
5photo OK
new same shooting
1photo OK
2photo OK
3photo OK
4photo OK
5photo not shoot, papywizard OK
new same shooting
1photo not shoot, papywizard OK > next photo
2photo OK
3photo OK
4photo OK
5photo OK
Configue Stabilization 1s
Time value 2,2s
Please where issue? Merlin? Bluetooth? Nokia N800? Papywizard?
Very thank your advice
Ludek
Last edited by Ludek007 (2009-06-19 18:36:44)
5D mark II, Merlin, Nodal Ninja, special full vr 360°
Offline
#2 2009-06-19 19:03:39
Re: not shooting
Possible issues:
1. You are using autofocus and camera fails to focus?
2. Time value is too short for exposure and clearing of buffer?
3. Unreliable shutter release cable wiring?
What version of Papywizard are you using?
What camera and lens?
Andrew Stephens
Nikon D40, Nikkor 10.5mm fisheye, Sigma 8mm f3.5 fisheye, Nikkor 18-55/50/35mm lenses, Nodal Ninja 5 Lite, Agno's Mrotator TCSshort
Nikon P5100, CP5000, CP995, FC-E8, WC-E63,WC-E68, TC-E2, Kaidan Kiwi 995, Bophoto pano bracket
Merlin/Orion panohead + Papywizard on Nokia 770/N800 and Windows XP/2K
Online
#3 2009-06-19 19:04:14
- Paul
- Member
- From: Bonn, Germany
- Registered: 2008-08-30
- Posts: 681
Re: not shooting
autofocus off?
if AF is on it may happen that the cam can't focus and don't release
Paul
close, but no cigar ... ... ...
Offline
#4 2009-06-19 19:32:06
- Ludek007
- Member
- Registered: 2009-06-03
- Posts: 14
Re: not shooting
mediavets wrote:
Possible issues:
1. You are using autofocus and camera fails to focus?
2. Time value is too short for exposure and clearing of buffer?
3. Unreliable shutter release cable wiring?
What version of Papywizard are you using?
What camera and lens?
Hi mediavets
1) autofocus off
2) cable original http://www.microsync.cz/prislusenstvi/kabely/vmc-115
3) Papywizard 2.0
4) tested Canon 5D mark II + EF 24-105 L 4
Thank You
5D mark II, Merlin, Nodal Ninja, special full vr 360°
Offline
#5 2009-06-19 19:42:42
Re: not shooting
Not that the 2.0.0 version has some bugs (I will release a 2.0.1 version soon). But I don't think it is the problem here.
Try to increase the 'pulse width (high/low)' param in the Camera tab...
Frédéric
Canon 20D + 17-40/f4 L USM + 70-200/f4 L USM + 50/f1.4 USM + Tokina 10-17 3.5-4.5 AF DX Fisheye
Merlin/Orion panohead + Papywizard on Nokia N800 and HP TC-1100
Offline
#6 2009-06-19 19:46:20
- Ludek007
- Member
- Registered: 2009-06-03
- Posts: 14
Re: not shooting
fma38 wrote:
Not that the 2.0.0 version has some bugs (I will release a 2.0.1 version soon). But I don't think it is the problem here.
Try to increase the 'pulse width (high/low)' param in the Camera tab...
tested.... tested.... tested....
This problem only LIVE view mode :-O
5D mark II, Merlin, Nodal Ninja, special full vr 360°
Offline
#7 2009-06-19 20:02:59
Re: not shooting
Not necessarilly the issue, but a few of us merlin/papy users have had issues with less than great connections with the shutter cable.
When the connection is suspect I had several shots in a very long sequence fail, the cable was the issue, as the cable that I modified had a poor camera connection.
Check and check again... IF it starts working again wiggle the plug at the camera and see if it returns... If that doesnt change, check the cable at the merlin side of the shutter cable, and unplug/replug...
Maybe something else, but for me and a few others it was simple cabling...
Canon 50D, 20D, 1D MKII
Tok 10-17FishEye,Canon 10-22, 24-70 2.8, 50 1.4, 70-200 2.8IS, 300 2.8,1.4x,2.0x
303SPH, Panosaurus, Merlin+Parallax Bluetooth+USB to PC and Nokia N810
Offline